80 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Microcoat Lubrication System MC800 MicroCoat Lubrication System Configure a system in 4 steps: 1. Choose the Base System Includes MC800 controller, tank, fluid manifold, flow control components, air manifold, and filter / regulator. # of Valves Part # Tank Size 1–2 7012656 3.8 L (1.0 gal) 3–4 7365970 7.5 L (2.0 gal) 2. Choose the Valves Includes valve mounting clamp. Valve Part # Spray Pattern MC785M 7 008020Standard (up to 76 mm / 3" of coverage) MC785M-WF 7008013Wide (up to 152 mm / 6" of coverage) 3. Choose the Solenoid Only one required. Includes cordset and bracket. Input Power Part # 24 VDC 7008014 120 VAC 7022160 220 VAC 7022161 4. Add Optional Accessories The most commonly selected accessories are shown. Accessories Part # Controller stand 7008017 Lubricant filter 7022156 Filter elements, 4 per box 7017347 Features and Benefits • Even, uniform coverage • Expandable, modular system • On the fly adjustment of oil coating • No overspray or mist • Easy “plug and play” setup The MC800 MicroCoat® System is a patented, different type of stock lubrication system that lets metal stampers apply the perfect amount of oil for each job. The MC800 controller operates up to eight valves. Precision flow controls permit the amount of lubricant applied by each valve to be adjusted independently. Valves can be mounted above or below the stock. When the system is initiated, steady air pressure supplied to the reservoir forces lubricant through the filter and flow controls, and out to the valves. Whether you are looking for steady or pulsed lubrication, these unique lubrication systems provide uniform coverage without overspray or mist, using much less oil. For use with • Blank Stock Coating • Can End Pull Tabs • Coil Stock Slitting • Cooling Fin Forming • Fine Blanking • Foil Rolling • Rust Prevention • Tube Forming • Valve / Wire Coating Specifications MC785M and MC785M-WF Valves Size (with fittings): 66.3l x 49.3dia mm (2.61l x 1.94dia") Weight: 206.4 g (7.3 oz) Lubricant inlet hole: 1/8 NPT Mounting: 6 mm tapped hole Cycle rate: Up to 60 per minute Lubricant chamber: Hard-coated anodized aluminum Air cap: 303 stainless steel Diaphragm: Viton® with PTFE coating Needle and nozzle: 303 stainless steel Nozzle diameter: 1.17 mm (0.046") MC800 Controller Cabinet size: 14.6w x 19.1d x 27.6h cm (5.75w x 7.50d x 10.88h") Weight: 4.8 kg (10.6 lb) Cycle rate: Up to 60 per minute Pressure switch rating: 20VA, 240V Air input required: 4.1 bar (60 psi) minimum Tank air pressure regulator: 2.0 bar (30 psi) maximum Nozzle air regulator: 2.0 bar (30 psi) maximum Approvals: CE, UKCA Warranty: 1 year, limited All stainless steel parts are passivated. US Patent No. D398,705 www.nordsonefd.com/MicrocoatVideo
RkJQdWJsaXNoZXIy MzM3Mjk3MQ==