137 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 SERIES 100 INLINE MIXERS Rugged and reliable, the Series 100 Mixers are all stainless steel and feature a modular design so you can remove the elements for easy cleaning. Two or more mixers can be coupled together using a pipe connector. Streamlined contour of the elements ensures the mixer flushes clean with less solvent. Heavy-walled tubing resists warpage during furnace cleaning (maximum furnace temperature should not exceed 1250 °F / 676 °C) and increases the life of the mixer. Part # # Mixing Elements Housing Ends (mnpt) Housing Length (in/cm) Pressure Limit+ Element / Housing Element Diameter 0.267 / 6.78 (in/mm) 7700364 12 1/8" 5.38 / 13.67 8750 / 600 316 stainless steel* / 304 stainless steel Element Diameter 0.363 / 9.22 (in/mm) 7700366 6 1/4" 3.75 / 9.53 8500 / 585 316 stainless steel* / 304 stainless steel 7700367 12 1/4" 7.00 / 17.78 8500 / 585 316 stainless steel* / 304 stainless steel Element Diameter 0.494 / 12.55 (in/mm) 7700370 12 3/8" 9.50 / 24.13 7250 / 500 316 stainless steel* / 304 stainless steel Element Diameter 0.623 / 15.83 (in/mm) 7700373 12 1/2" 11.00 / 27.94 7250 / 500 316 stainless steel* / 304 stainless steel Element Diameter 0.779 / 19.79 (in/mm) 7700377 12 3/4" 14.75 / 37.47 6000 / 415 316 stainless steel* / 304 stainless steel Element Diameter 1.032 / 26.21 (in/mm) 7700384 12 1" 18.50 / 46.99 4500 / 310 316 stainless steel* / 304 stainless steel Element Diameter 1.580 / 40.13 (in/mm) 7700391 6 1-1/2" 14.00 / 35.56 3000 / 207 316 stainless steel* / 304 stainless steel Element Diameter 2.035 / 51.69 (in/mm) 7700395 6 2" 17.50 / 44.45 2500 / 170 316 stainless steel* / 304 stainless steel +Pressure limit based on psi @300 °F / bar @150 °C *Elements are removable. Contact EFD for replacement part recommendations. PU FOAM (FFR) MIXERS Foam Froth Remover (FFR) mixers are intended for urethane foam applications. The extended tube serves two purposes: (1) for reach, and (2) to reduce the spiraling of material after the elements to allow for a more accurate dispense. Part # # Mixing Elements Flow Rate (PPM) Housing Length (in/cm) Element / Housing Element Diameter 0.50 / 12.70 (in/mm) 7701023 24 15 13.2 / 33.53 Acetal / PP Element Diameter 0.64 / 16.23 (in/mm) 7700679 10 30 40.0 / 101.60 Acetal / Nylon Element Diameter 0.79 / 20.07 (in/mm) 7700688 12 60 25.0 / 63.50 Acetal / Nylon 7700690 16 60 28.0 / 71.12 Acetal / Nylon 7700692 16 60 40.0 / 101.60 Acetal / Nylon For use with: Meter Mix Valves Inline Mixers
RkJQdWJsaXNoZXIy MzM3Mjk3MQ==