PRODUCT CATALOG 11 Engineered Fluid Dispensing Your Partner in Precision Fluid Dispensing
Contents Since 1963, Nordson EFD dispensing systems have helped thousands of companies make precise deposits of adhesives, lubricants and other assembly fluids. Our business is to match your specific application needs with our wide range of dispensing tools to maximize your total cost savings. From benchtop dispensers to highperformance automated dispensing systems, EFD devices are used by manufacturers in hundreds of industries throughout the world. We invite you to learn more, and look forward to working with you. Precision Dispensers...............................................................................2 Precision Fluid Dispenser Selection Guide...............................................3 High Precision Dispensers.......................................................................4 General Purpose Dispensers...................................................................7 Dispenser Accessories............................................................................8 Portable Dispensers................................................................................9 Productivity Tools..................................................................................10 Filling Systems......................................................................................13 Dispensers Components Valves Robots Solder 2K Two-Component Systems Resources Optimum Syringe Barrels......................................................................15 Optimum Cartridge Systems.................................................................22 Precision Dispensing Tips.....................................................................27 Valve Selection Guide / Valve Accessories............................................31 Precision Jetting Valve Systems............................................................42 PICO Jetting Systems.......................................................................43 Liquidyn Jetting Systems...................................................................51 Precision Dispense Valve Systems........................................................55 Diaphragm Valves.............................................................................56 Piston Valves.....................................................................................60 Needle Valves....................................................................................62 High Pressure Valves.........................................................................66 Auger Valves.....................................................................................67 Radial Spinner Systems.....................................................................68 ValveMate Controllers........................................................................69 Precision Spray Valve Systems.............................................................75 Spray Valves.....................................................................................76 Radial Spray Valves...........................................................................79 Microcoat Lubrication System...........................................................80 ValveMate Spray Controllers..............................................................82 Precision Volumetric Dispensing Systems.............................................88 Progressive Cavity Pump Systems....................................................89 Progressive Cavity Pump Accessories...............................................93 Tanks and Reservoirs............................................................................96 Automated Dispensing Systems..........................................................100 Automated Dispensing System Selection Guide..............................101 Automated Dispensing System Accessories....................................111 Solder Solutions..................................................................................114 2K Cartridges / 2K Pistons..................................................................120 2K Do-It-Yourself (DIY) Dual Syringes..................................................125 2K Dispensers / 2K High Solid Spray (HSS) System............................127 Disposable Mixers / Inline Mixers.........................................................130 Meter Mix Valves.................................................................................138 2K Accessories...................................................................................142 Useful Resources................................................................................144
1 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Industries EFD engineered fluid control systems are trusted for applying controlled amounts of adhesives, sealants, lubricants, and other assembly fluids that increase productivity for nearly every industrial manufacturing process. Electronics • Capacitors • Digital Cameras • Electronic Chips • Electronic Housing Chassis • Fiber Optics • LEDs • Liquid Crystal Displays • Membrane Switches • Microwave Components • PC Board Assemblies • SMT Circuit Boards 1K and 2K Fluid Packaging • Adhesives • Bait Gels • Braze Pastes • Epoxies • Greases • Lubricants • RTV Sealants • Silicones • Solder Pastes • Thermal Compounds Food Manufacturing and Packaging • Coating Food with Scent / Flavoring • Filling Perfume Bottles • Filling / Topping Off Foil Packets and Other Containers • Lubricating Can Stock, Can Ends, and Pull Tabs • Lubricating Foil Slitters • Shrink Wrapping Wireless • Accessories • Camera Modules • Cover Glass • Displays • Frames • Keypads • Microspeakers • Miscellaneous Unit Assembly • Protective Treatments • Touch Panels Life Sciences • Catheters • Contact Lenses • Defibrillators • Diagnostic Equipment • Hearing Aids • Membranes • Pacemakers • Pills and Medicines • Respiration Devices • Stent Coating • Surgical and Dental Tools • Syringe Lubrication • Vial Filling Construction • Caulking • Chemical Anchors into Concrete, Brick, Stone, and Wood • Crack Repair • Door and Window Sealing • Hydraulic Pumps • Joint Sealing • Nail Plate Manufacturing • Roof Installation Aerospace • Cockpits • Electrical Systems • Flight Recorders • GPS Systems • Instrument Panels • Landing Gear • Measurement Instruments • Military Munitions • Propellant Parts • Satellites • Seating • Turbines • Wire Harnesses Automotive • Air Conditioning Systems • Body Panels • Brakes • Control Switches • Electrical Systems • Engine Components • Frames and Suspensions • Fuel Systems • Instrument Panels • Lighting, Headlamps • Mirrors • Passenger Restraints • Sensors, Relays, Regulators • Transmissions • Wheels • Windshields • Wiring Harness Connectors
2 Precision Dispensers Benchtop / Portable / Tools / Filling EFD’s precision dispensing systems make it simple to apply accurate, repeatable amounts of virtually any assembly fluid — including adhesives, epoxies, lubricants, threadlockers, paints, and grease. By using digital timers and precision air regulators or positive displacement technology to determine the amount of material applied, EFD dispensers eliminate operator guesswork and take the variability out of the dispensing process. The result is higher productivity, better quality and reliability, a cleaner and safer workplace, and lower production costs. Products range from high-precision dispensers for critical applications that require a high degree of process control to economical units for general-purpose use.
3 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 BENCHTOP DISPENSERS UltimusPlus I / II Ultimus V Ultimus I / II Performus X100 / X15 Performus I Type Air Powered Air Powered Air Powered Air Powered Air Powered Recommended Fluids All fluids / Low-viscosity fluids All fluids All fluids / Low-viscosity fluids All fluids / Low-viscosity fluids All fluids Air Pressure Range 0.7–7.0 bar (10–100 psi) / 0–1.0 bar (0.3–15 psi) 0–7.0 bar (0–100 psi) 0–7.0 bar (0–100 psi) / 0–1.0 bar (0–15 psi) 0–7.0 bar (0–100 psi) / 0–1.0 bar (0–15 psi) 0–7.0 bar (0–100 psi) Time Range 0–999.9999 s 0–9.9999 s 0–999.9999 s 0–99.9 s — Warranty 5 years1 1 year 5 years1 2 years 1 year Steady Mode P P P P P Teach Mode P P P P — Timed Mode P P P P — Display Touchscreen LCD LCD — — Digital Pressure / Time P P P P Analog Digital Vacuum P P P Analog Analog Multilingual P P P — — Lockout All Parameters Time & Pressure Time — — Number of Programs 16 (time, pressure, vacuum, barcode) 400 (time, pressure, vacuum) 16 (time) — — Multiple Cycles MultiShot2 Auto Sequence3 — — — Initiate Signal P P P P — End-of-Cycle Feedback P P P P — RS-232 — P — — — Ethernet P4 — — — — 1Two years in Asia. 2MultiShot allows multiple shots from a single press of the foot pedal. 3Programmable memory that automatically adjusts dispensing parameters for viscosity changes. 4UltimusPlus allows remote control from a PLC or computer via NX protocol. P Applicable | — Not applicable Precision Fluid Dispenser Selection Guide
4 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 UltimusPlus Series 7364361 UltimusPlus I Features a 0.7–7.0 bar (10–100 psi) pressure regulator that handles all fluids. Also includes NX protocol via Ethernet. Order power cord separately. 7364475 UltimusPlus I — Calibrated Same as #7364361 but the unit has been calibrated to EFD’s specifications using standards traceable to the National Institute of Standards and Technology (NIST). Also includes NX protocol via Ethernet. Order power cord separately. 7364362 UltimusPlus II Has a 0.02–1.0 bar (0.3–15 psi) regulator that provides greater control when dispensing thin fluids. Also includes NX protocol via Ethernet. Order power cord separately. 7364476 UltimusPlus II — Calibrated Same as #7364362 but the unit has been calibrated to EFD’s specifications using standards traceable to the National Institute of Standards and Technology (NIST). Also includes NX protocol via Ethernet. Order power cord separately. 7014871 American Plug Power Cord Kit 7014872 European Plug Power Cord Kit Experience a new level of ease with Nordson EFD’s UltimusPlus™ dispensers. Train operators in seconds with intuitive touchscreen control of dispensing parameters. Designed to simplify setup and operation, the advanced functionality of the UltimusPlus allows operators to focus on making accurate, controlled deposits. Features and Benefits • Electronic pressure regulation with full operator lockout • Optional barcode scanner allows you to automatically alternate between 16 programs • Dispense multiple shots from a single press of the foot pedal with MultiShot™ • Enable process verification by downloading Dispense Log data • Support Smart Factory integration using Ethernet compatibility with NX protocol via TCP/IP • Improve operational efficiency by programming and monitoring dispensing from a PLC or personal computer Order Your Components Nordson EFD Optimum® components are designed to work with your dispenser as part of a complete, integrated system that produces the most accurate, repeatable deposits possible. See Optimum Components & Precision Dispense Tips for details. Specifications www.nordsonefd.com/UltimusPlusVideo High Precision Dispensers Cabinet size: 21.2w x 10.8h x 19.2d cm (8.33w x 4.27h x 7.55d") Weight: 1.8 kg (4.0 lb) Power adapter: AC input: 100–240 VAC (±10%), ~50/60 Hz, 0.6 Amp DC Output: 24 VDC @ 3.75 Amp Cycle rate: Exceeds 600 cycles per minute Time range: 0.0001–999.9999 s End-of-cycle feedback circuits: 24 VDC; 100 mA maximum Cycle initiate: Foot pedal, finger switch, 24 VDC signal, or mechanical contact closure Air output: UltimusPlus I: 0.7–7.0 bar (10–100 psi) UltimusPlus II: 0.02–1.0 bar (0.3–15 psi) UltimusPlus II: 0.02–1.0 bar (0.3–15 psi) Approvals: CE, UKCA, TUV, RoHS, WEEE, China RoHS Warranty: See Product Manual
5 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 The Ultimus™ V High Precision Dispenser provides the highest level of accuracy and process control when applying fluids that change viscosity, including 2-part epoxies and other fluids that thicken over time, as well as UV-cure adhesives and materials that get thinner as ambient temperatures rise. Features and Benefits • Fully electronic control of dispense time, air pressure, and vacuum to ensure exceptionally high accuracy, repeatability, and shot consistency • Programmable memory that automatically adjusts dispensing parameters for viscosity changes • Interactive PC software and remote communications with PC/PLC via RS-232 protocol • Selectable operator lockout and alarm settings “Nordson EFD’s Ultimus V dispenser is a notable improvement over the previous generation, reducing variation and improving shot-to shot-consistency.” – Renishaw Order Your Components Nordson EFD Optimum components are designed to work with your dispenser as part of a complete, integrated system that produces the most accurate, repeatable deposits possible. See Optimum Components & Precision Dispense Tips for details. High Precision Dispensers Ultimus V Series 7012590 Ultimus V Features a 0–7.0 bar (0–100 psi) pressure regulator that handles all fluids. Order power cord separately. 7012589 Ultimus V — Calibrated Same as #7012590 but the unit has been calibrated to EFD’s specifications using standards traceable to the National Institute of Standards and Technology (NIST). Order power cord separately. 7014503 Ultimus V Optimeter 30cc Specifically designed to work with the Ultimus V, the patented OptimeterTM provides even greater control when dispensing all fluids by automatically increasing airflow as the syringe barrel empties. Specify #7014504 for Optimeter 10cc. 7014871 American Plug Power Cord Kit 7014872 European Plug Power Cord Kit Specifications Cabinet size: 22.5w x 9.50h x 19.9d cm (8.86w x 3.74h x 7.85d") Weight: 3.4 kg (7.7 lb) Internal AC-DC power supply: AC input: 100–240 VAC (±10%), ~50/60Hz, 0.5 A DC output (internal): 24 VDC @ 1.7 A Cycle rate: Exceeds 600 cycles per minute Time range: 0–9.9999 s End-of-cycle feedback circuits: 5–24 VDC, 100 mA maximum Cycle initiate: Foot pedal, finger switch, or 5–24 VDC signal Air output: 0–7.0 bar (0–100 psi) Approvals: CE, UKCA, TUV, RoHS, WEEE, China RoHS Warranty: 1 year, limited www.nordsonefd.com/Ultimus-V
6 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Features and Benefits • All-digital, multi-function display • 16 memory settings • 4-decimal time setting • Multilingual display • Operator lockout of time setting • Universal power supply Ultimus I–ll Series 7017041 Ultimus I Features a 0–7.0 bar (0–100 psi) pressure regulator that handles all fluids. 7012584 Ultimus I — Calibrated Same as #7017041 except the unit has been calibrated to EFD specifications using standards traceable to the National Institute of Standards and Technology (NIST). 7002003 Ultimus II Has a 0–1.0 bar (0–15 psi) regulator that provides greater control when dispensing thin fluids. 7012586 Ultimus II — Calibrated Same as #7002003 except the unit has been calibrated to EFD specifications using standards traceable to the National Institute of Standards and Technology (NIST). Featuring simultaneous digital display of all dispenser settings and time adjustment as fine as 0.0001 seconds, Ultimus I–II dispensers bring exceptional process control to medical device, electronics, and other critical dispensing processes. “The dispensers make quick, easy deposits. Our operators love it. A big winner.” –Automotive Electronics Order Your Components Nordson EFD Optimum components are designed to work with your dispenser as part of a complete, integrated system that produces the most accurate, repeatable deposits possible. See Optimum Components & Precision Dispense Tips for details. High Precision Dispensers Specifications Cabinet size: 14.3w x 18.1h x 17.3d cm (5.63w x 7.12h x 6.82d") Weight: 2.3 kg (5.0 lb) Power adapter: AC input: 100–240 VAC (±10%), ~50/60Hz, 0.6 Amp DC output: 24 VDC @ 1.04 Amp Cycle rate: Exceeds 600 cycles per minute Time range: 0.0001–999.9999 s End-of-cycle feedback circuits: 5–24 VDC, 100 mA maximum Cycle initiate: Foot pedal, finger switch, or 5–24 VDC signal Air output: Ultimus I: 0–7.0 bar (0–100 psi) Ultimus II: 0–1.0 bar (0–15 psi) Approvals: CE, UKCA, TUV, RoHS, WEEE, China RoHS Warranty: 5 year, no-fault (Americas and Europe) 2 year, no-fault (Asia) www.nordsonefd.com/Ultimus-I
7 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Performus X Series 7363256 Performus X100 Features a 0–7.0 bar (0–100 psi) pressure regulator that handles all fluids. 7363257 Performus X15 Features a 0–1.0 bar (0–15 psi) pressure regulator that provides greater control when dispensing thin fluids. Nordson EFD’s Performus™ dispensers increase throughput, improve yields, and reduce production costs through controlled application of adhesives, lubricants, and other assembly fluids. Features and Benefits • Consistent dots and fills, and neat beads • Timed, Teach, or Steady operation • Vacuum control keeps thin fluids from dripping between cycles • Digital time / pressure display Used for operator-controlled dispensing applications that do not require a timed shot, the Performus I handles all fluids to dispense dots, beads, and fills. It features an electric foot pedal, plus vacuum control to keep thin fluids from dripping. Features and Benefits • Steady mode / analog air pressure display • Fast, controlled application / clean, drip-free cutoff Performus I 7012330 Performus I Features a 0–7.0 bar (0–100 psi) pressure regulator that handles all fluids. Order Your Components Nordson EFD Optimum components are designed to work with your dispenser as part of a complete, integrated system that produces the most accurate, repeatable deposits possible. See Optimum Components & Precision Dispense Tips for details. General Purpose Dispensers Specifications Cabinet size: 26.4w x 17.1d x 6.7h cm (10.38w x 6.75d x 2.62h") Weight: 1.0 kg (2.2 lb) Power adapter: AC input: 100–240 VAC (±10%), ~50/60Hz, 0.6 Amp DC output: 24 VDC @ 0.75 Amp Cycle rate: Exceeds 600 cycles per minute Time range: 0–99.9 s End-of-cycle feedback circuits: 5–24 VDC, 100 mA maximum Cycle initiate: Foot pedal, finger switch, or 5–24 VDC signal Air output: Performus X100: 0–7.0 bar (0–100 psi) Performus X15: 0–1.0 bar (0–15 psi) Approvals: CE, UKCA, ETL, RoHS, WEEE, China RoHS Warranty: 2 year, limited www.nordsonefd.com/PerformusVideo
8 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Dispenser Accessories “Your dispensers work great. Making dots used to be an art. Now we don't even think about it. We just fill the barrels and go.” – Preferred Technical Group PART # ACCESSORY DESCRIPTION UltimusPlus Ultimus Performus X I–II V 7017105 Flex arm syringe barrel holder Mounts to dispenser cabinet; can be adjusted to multiple positions P 7014503 7014504 Optimeter – 30cc size Optimeter – 10cc size Syringe barrel adapter that maintains consistent fullto-empty pressure on fluid being dispensed P 7016718 7017089 Finger switch (Rectangular connector) Finger switch (Round DIN connector) Low voltage, push-button finger switch controls dispense cycle 7021053 Syringe barrel production stand Provides full-barrel swivel, horizontal, and vertical adjustment. Accepts all EFD barrels. 7017143 8-pin I/O connector assembly Allows easy connection to dispenser for external control 7017049 Cleanroom filter muffler Filters output air to meet Fed 209-B (0.5 micron particulates) 7024803 VacTweezer™ pickup tool Useful, low cost pick-and-place tool with staticidetreated kit. Includes (7) tips, (5) pad sizes 7013229 Dispensing tip sample kit Includes a selection of various types and styles of dispensing tips 7002002 5-micron filter / regulator Provides proper air filtering for all dispensers. Order if you do not have a clean, dry, filtered factory air supply. 7016548 5-micron filter / regulator with coalescing filter 5-micron filter / regulator with coalescing filter 7021515 Coalescing filter assembly only Recommended for systems dispensing cyanoacrylates 7014880 Filter element replacement kit Removes liquid aerosols from air supply 7364357 Barcode scanner Scans barcode and automatically alternates between programs
9 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Portable Dispensers HPD Hand Plungers DispensGun 7023615 HPD3K Hand Plunger 3cc syringe barrel size 7023622 HPD5 Hand Plunger 5cc syringe barrel size 7023596 HPD10K Hand Plunger 10cc syringe barrel size 7023610 HPD30K Hand Plunger 30cc syringe barrel size 7023133 DG3 DispensGun 3cc syringe barrel size 7023137 DG5 DispensGun 5cc syringe barrel size 7023125 DG10 DispensGun 10cc syringe barrel size 7023134 DG30 DispensGun 30cc syringe barrel size 7023141 DG55 DispensGun 55cc syringe barrel size Versatile and inexpensive, manual dispensers are ideal for touch-ups, low-volume assembly, and field work. They can be used with all EFD syringe barrels, pistons, and tips. HPD Designed for use with EFD syringe barrels and pistons, HPD™ Hand Plungers provide a clean, comfortable alternative to squeeze bottles and hand syringes. DispensGun® Features 10:1 mechanical leverage that makes it easy to dispense thick materials like greases and silicones without hand fatigue. A clean cutoff when the trigger is released prevents oozing between fluid applications. Features and Benefits • Ergonomic design • Fatigue-free dispensing of thick fluids • Positive shutoff, no dripping • Simplified maintenance • Reusable Fluids MODELS DG HPD Anaerobics Coatings Cyanoacrylates Gel Cyanoacrylates White Glues Epoxies Inks Greases Oils Sealants Silicones Solder / Braze Pastes Solvents UV Cure Key Recommended Satisfactory Do not use HPD DispensGun 2K Dispense Guns See 2K Dispense Guns for dispensing 2-component materials. “Production doubled the first day the EFD systems were installed.” – Food Packaging Group
10 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Productivity Tools HPx High-Pressure Dispensing Tool 7023590 HP3cc Dispensing Tool Uses 3cc EFD syringe barrels and pistons and produces a maximum pressure of 700 psi (48.2 bar). 7015289 HP5cc Dispensing Tool Uses 5cc EFD syringe barrels and pistons and produces a maximum pressure of 400 psi (27.6 bar). 7012598 HP10cc Dispensing Tool Uses 10cc EFD syringe barrels and pistons and produces a maximum pressure of 400 psi (27.6 bar). The HP™ Series high-pressure dispensing tool applies RTV silicones, epoxies, medical adhesives, and other thick fluids through dispensing tips as small as 0.004" in diameter. Designed to work with EFD air-powered dispensers, these tools will multiply the output of a standard 100 psi dispenser up to 7x. Features and Benefits • Fast, fatigue-free application of thick fluids • Aluminum handpiece is easy to hold • Easy tip installation / removal with built-in wrench • Low fluid level indicator The pneumatically operated Equalizer™ 2K dispensing tool makes it possible to dispense accurate, repeatable amounts of 2-component materials. It is designed for use with EFD dispensers and 50mL Side x Side cartridges and static mixers (order separately). Equalizer 2K Dispensing Tool 7360152 Standard configuration provides accurate 50mL 1:1 and 2:1 dispensing. 7015875 Kit Universal Stand Mount 25−50 mm. www.nordsonefd.com/HPXTool
11 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Productivity Tools ProcessMate 5000 Universal Centrifuge 7015542 100–240 VAC Centrifuge Multi voltage. RoHS compliant. Includes syringe adapters and power cord. 7365995 Centrifuge Spare Parts Includes 3cc, 5cc, 10cc, and 30cc centrifuge adapter sets, plus rotor sleeves and tub seals. The Universal Centrifuge quickly and efficiently removes entrapped air bubbles and air pockets from fluid that is packaged in syringes. The adjustable speed control allows the user to adjust the G-force for low- to high-viscosity fluids. The electric brake can be initiated at the end of the cycle to quickly stop the rotor from spinning, saving additional process time. Features and Benefits • Improves process control and reduces rejected parts • Spins up to (4) 3cc–30cc syringes • Fixed angle rotor • Lid locks for safety • All-metal cabinet construction for safety For use with • 2-part Epoxies • Frozen Epoxies • RTVs • Greases • Various other fluids
12 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Vacuum Pickup System ProcessMate 100 7012329 ProcessMate 100 Vacuum Pickup Pen Includes assorted antistatic tips and vacuum cups. 7024803 VacTweezer Pickup Tool The kit includes the same assortment of silicone rubber vacuum cups and tips, along with a small squeeze bulb with a luer fitting that attaches to the tips to generate vacuum. The ProcessMate 100 provides a simple, efficient way to lift and position small or delicate components in benchtop assembly processes. To lift the component, the operator simply places the pickup pen on the component and presses an electric foot pedal to apply vacuum. When the component has been positioned, releasing the foot pedal stops the vacuum and releases the component. Note: If vacuum is only needed occasionally or there is no access to compressed air, the VacTweezer is a useful, low-cost pick-and-place tool. Soft, see-through pickup pads make it easy to accurately place components without scratching or damage. Features and Benefits • Faster, more precise placement than conventional tweezers • Simple setup and operation • Prevents damage to delicate or intricate components • Cost-effective way to increase throughput “Cut board time from 4 minutes to 45 seconds. Pickup tool is great.” – K.M. Productivity Tools Specifications Cabinet size: 18.3w x 5.1h x 8.6d cm (7.22w x 2.00h x 3.38d") Weight: 1.0 kg (2.2 lb) Input AC (to power supply): Universal Multi Voltage, 100/240 VAC, 50/60 Hz Output DC (from power supply): 24 VDC, 1.04 Amp maximum Cycle initiate: Foot pedal, finger switch Input air pressure: 7.0 bar (100 psi) maximum Air output: 0–110 inH2O dependent on user setting Vacuum output: 0–110 inH2O dependent on user setting Approvals: CE, UKCA, RoHS, WEEE, China RoHS, TUV Warranty: 1 year, limited
13 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Filling Systems 7022452 940BL 1/10 Gallon Caulking Tube Comes complete with 0–60 psi (0–4.1 bar) regulator and gauge, retainer and cap assembly with toggle switch, fittings, stand, and 3cc, 5cc, 10cc, and 30/55/70cc size syringe barrel fill level plugs. EFD filling systems provide a fast, neat and easy way to transfer greases, silicones, and other non-pourable fluids from cartridges and bulk containers into 3cc, 5cc, 10cc, 30cc, 55cc, and 70cc syringe barrels. Manual filling systems are a cost-effective way to eliminate trips to the refilling station and keep production lines running smoothly. Barrel filling stations are available in sizes 2.5 fl oz, 6 fl oz, 12 fl oz, 20 fl oz, and 32 fl oz (75 mL, 180 mL, 360 mL, 600 mL, and 960 mL) cartridges. Features and Benefits • See-through design allows maximum amount of material usage per cartridge • Fast and accurate filling • Accommodates 3cc to 70cc syringes • Small footprint allows easy positioning of multiple units • Prefilling syringes increases productivity and reduces labor costs Atlas Syringe Filling Systems 7022446 922BL Filling System 2.5 fl oz (75 mL) cartridge. Comes complete with 0–100 psi (0–7.0 bar) regulator and gauge, retainer and cap assembly with toggle switch, fittings, stand, cartridge with plunger and 5cc, 10cc, and 30/55/70cc syringe barrel fill level plugs. 7022447 926BL Filling System 6 fl oz (180 mL) cartridge. Ships with the same parts as the 922BL. 7022445 920BL Filling System 12 fl oz (360 mL) cartridge. Ships with the same parts as the 922BL. 7013568 Filling System 20 fl oz (600 mL) cartridge. Ships with the same parts as the 922BL. 7013901 Filling System 32 fl oz (960 mL) cartridge. Ships with the same parts as the 922BL. 1/10 Gallon Caulking Tube Filling systems make it simple to transfer silicones and other materials supplied in 1/10 gal cartridges to 3cc, 5cc, 10cc, 30cc, 55cc, or 70cc syringe barrels without waste, mess, or air bubbles.
14 Optimum Components & Precision Dispense Tips The Standard in Fluid Dispensing What makes EFD’s Optimum dispensing components better than the rest? Engineered Fluid Dispensing™. Each patented component has been designed as part of a complete, integrated system that improves yields and reduces costs by producing the most accurate, repeatable fluid deposits possible. Our syringe barrels are made of a proprietary polypropylene blend that delivers exceptional clarity and dimensional stability. The unique internal design enhances fluid flow and minimizes turbulence and shear during filling and dispensing. Matching pistons are available in six styles to ensure control for virtually any fluid in any application. When fluid is dispensed, the close tolerance wiping action eliminates waste and residue. Syringe barrel adapters have a design that facilitates installation / removal, and a positive safety locking action that prevents accidental disengagement. Free of flash, burrs, or other contaminants, EFD dispensing tips are designed with engineered hub flats for easy twist on, twist off, and SafetyLok threads to ensure safe, positive attachment to the syringe barrel. Precision-fit adapter for easy, safe attachment Channeled wiper piston eliminates trapped air, waste, and dripping Uniform barrel wall thickness for safety 0º taper barrels for smooth top-to-bottom piston travel Threaded tip hubs for safe, secure attachment Consistent color coding and tip diameters, regardless of style / length Tips are free of burrs and flash that could obstruct fluid flow
15 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Dispensing Components Optimum Syringe Barrels EFD produces the highest quality syringe barrels and pistons in the industry. Syringe barrels and pistons are produced in our own silicone-free facilities, where they are subjected to stringent quality control inspections throughout the entire manufacturing process. Features and Benefits • Precision fit between syringe and piston ensures consistent fluid deposits • Wiper piston improves fluid control, keeps fluids from dripping and eliminates waste by wiping the syringe wall clean • Wide variety of styles and sizes • Package labels include lot numbers for process control and traceability Barrel Dimensions Size A B 3cc 11.1 mm (0.44") 73.0 mm (2.88") 5cc 14.3 mm (0.56") 68.3 mm 2.69") 10cc 19.1 mm (0.75") 88.9 mm (3.50") 30cc 25.4 mm (1.0") 115.9 mm (4.56") 55cc 25.4 mm (1.0") 173.0 mm (6.81") 70cc 25.4 mm (1.0") 213.1 mm (8.39") Note: This data is typical and does not constitute a specification. “One stop shopping for syringes, barrel adapters, needles and tips along with excellent reference materials and pictures of actual applications to spark new ideas.” – Infinera SYRINGE BARRELS Each box contains syringes in dust-free packaging Size MOST FLUIDS Clear Barrels UV / Light Sensitive Amber Barrels UV / Light Block Black Barrels QTY 3cc 7366095 7366092 7366093 100 3cc 7012073 7012084 7012090 1000 5cc 7366101 7366098 7366099 100 5cc 7012095 7012102 7012108 1000 10cc 7366089 7366878 7366087 100 10cc 7012113 7366879 7012129 1000 30cc 7366060 7366842 7366058 50 30cc 7012135 7366839 7012148 1000 55cc 7366066 7366858 7366064 50 55cc 7012154 7366859 7012163 500 70cc 7366070 7366862 – 50 70cc 7364912 7366863 – 500 Sets are available in clear for most fluids; transparent amber for UV- and light-sensitive materials (less than 12% visible light from 550 nm or less); and opaque black for complete light blockage.
16 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Dispensing Components Optimum Syringe Barrel Kits Nordson EFD syringe barrel kits provide the most convenient and reliable way to package fluids. Each kit contains 50, 500, or 1000 complete sets of syringes and pistons or syringes, pistons, tip caps, and end caps. White SmoothFlow wiper pistons and blue end and tip caps are standard. These components come packaged in anti-static bags. Individual bags are sealed with tamper-evident seals. Features and Benefits • Simplify handling and control distribution to filling stations • Reduce waste and loss of individual components — EFD kits are organized in boxed sets • Easily manage inventory and order placement • Anti-static bags protect components from dust and other contaminants • Easily track parts by lot numbers that are placed on each component bag SYRINGE BARREL & PISTON KITS Each box contains syringes and pistons in dust-free packaging. Size MOST FLUIDS Clear Barrels White Pistons THIN FLUIDS Clear Barrels Red Pistons UV / Light Sensitive Amber Barrels White Pistons UV / Light Block Black Barrels White Pistons QTY 3cc 7366044 7366043 7366041 7366042 100 3cc 7012081* – 7013603* 7013614* 1000 5cc 7366045 – – – 100 5cc 7012097* – 7013602* 7013615* 1000 10cc 7366040 – 7366883 – 100 10cc 7012115* 7013989* 7366882* 7012131* 1000 30cc 7366054 7366053 7366856 7366052 50 30cc 7013227 7012137* 7013990* 7366847* 7012150* 1000 55cc 7366056 – 7366857 – 50 55cc 7012156* – 7366845* 7012165* 500 Syringe barrels are available in clear for most fluids; transparent amber for UV- and light-sensitive materials (less than 12% visible light from 550 nm or less); and opaque black for complete light blockage. *Includes pre-installed piston
17 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 From previous page SYRINGE BARREL, PISTON, & CAP KITS Each box contains syringes, pistons, end caps, and tip caps in dust-free packaging. Size MOST FLUIDS Clear Barrels White Pistons Blue Tip / End Caps Clear Barrels Beige Pistons Blue Tip / End Caps Clear Barrels Clear Pistons Blue Tip / End Caps UV / Light Sensitive Amber Barrels White Pistons Blue Tip / End Caps UV / Light Sensitive Amber Barrels Clear Pistons Blue Tip / End Caps UV / Light Block Black Barrels Red Pistons Blue Tip / End Caps QTY 3cc 7012078 7364500** 7015281 7361918* – 7012087 7363405* 7014363* 7365735** 1000 5cc 7012100 7015283 7363663 7012105 – – 1000 10cc 7012120 7015282 7360509 7366880 7366881* – 7015992 7014365* 7365736** 1000 30cc 7012141 7012142* 7015284 7360582 7366850 7366829 7015993 7014366* 7365737** 1000 55cc 7012157 7013807** 7015285 – 7366844 7366833* 7366827 7014367* 500 Syringe barrels are available in clear for most fluids; transparent amber for UV- and light-sensitive materials (less than 12% visible light from 550 nm or less); and opaque black for complete light blockage. *Includes pre-installed piston **Includes pre-installed tip cap SYRINGE BARREL & PRE-INSTALLED TIP CAP KITS Each box contains syringes and pre-installed tip caps in dust-free packaging. Size Clear Barrels UV / Light Sensitive Amber Barrels UV / Light Block Black Barrels QTY 3cc 7361942 7361972 – 1000 5cc 7013228 – – 1000 10cc 7012117 7366877 – 1000 30cc 7013802 7366832 7015348 1000 Syringe barrels are available in clear for most fluids; transparent amber for UV- and light-sensitive materials (less than 12% visible light from 550 nm or less); and opaque black for complete light blockage. Dispensing Components
18 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Optimum Pistons A piston is inserted into the syringe barrel after it has been loaded with fluid to ensure uniform dispensing, prevent dripping, and eliminate waste by wiping barrel walls clean as fluid is dispensed. Optimum pistons are molded from high-density polyethylene.* End caps and tip caps provide an airtight seal that allows you to prefill syringe barrels or seal partially used syringes between shifts. End caps feature a precision fit and use a convenient push-button to produce a snug, air-tight seal. Tip caps have a large knurled gripping surface that simplifies attachment, and a vent that prevents air from being introduced into the syringe barrel during installation. The gripping action of the tip cap is designed to maximize the seal and yet be easily removed by the user. Available in blue or green. Optimum End and Tip Caps Adapter Assemblies Lightweight adapters are designed for fast attachment and feature slots that lock securely onto matching tabs on the syringe barrel. Available in six styles: White SmoothFlow wiper pistons are used with most fluids. Beige SmoothFlow pistons are loose-fitting and used with air-entrapped fluids. Red SmoothFlow pistons are tight-fitting and used with mechanical dispensers. Orange Flat-walled pistons have a looser fit to prevent “bouncing” when dispensing stringy, airentrapped fluids. Blue LV Barrier pistons are for cyanoacrylates and very low viscosity fluids. Clear Flex pistons are flexible and reduce “bouncing” in viscous fluids while maintaining excellent wall-wiping. SYRINGE BARREL PISTONS Size White SmoothFlow Beige SmoothFlow Red SmoothFlow Orange Flatwall Blue LV Barrier Clear Flex QTY 3cc 7366134 7366126 7366133 7366132 7366128 7366131 100 3cc 7012167 7012171 7012169 7012322 7014603 7362321 1000 5cc 7366141 7366135 7366140 7366139 – 7366138 100 5cc 7012173 7012177 7012175 7012324 – 7362318 1000 10cc 7366125 7366117 7366124 7366123 7366119 7366122 100 10cc 7012179 7012183 7012181 7012326 7014601 7029356 1000 30/55/70cc 7366084 7366076 7366083 7366082 7366078 7366081 50 30/55/70cc 7012185 7012189 7012187 7012328 7014599 7029552 1000 ADAPTER ASSEMBLIES Size Blue 0.9 m (3 ft) Hose Blue 1.8 m (6 ft) Hose Blue 0.9 m (3 ft) Hose w/Filter Trap Yellow 0.9 m (3 ft) Hose 3cc 7012341 7012059 7012063 7016113 5cc 7012054 7012058 7012062 – 10cc 7012339 7012057 7012061 – 30/55/70cc 7012338 7012056 7012060 7005011 Molded one-piece, acetal adapter head with NBR O-ring, flexible polyurethane air hose (5/32" OD x 3/32" ID), male quick-connect, and safety clip. SNAP-TIGHT END CAPS Snap-on end caps provide a tight seal. Size Blue Green QTY 3cc 7366108 – 100 3cc 7012191 – 1000 5cc 7366113 7366116 100 5cc 7012193 – 1000 10cc 7366104 7366107 100 10cc 7012195 – 1000 30/55/70cc 7366071 – 50 30/55/70cc 7012197 – 1000 TWIST-ON TIP CAPS Twist-on tip cap seals syringe barrel. Size Optimum Blue Optimum Green Ultra Blue Ultra Orange QTY One size 7012198 – – 7017976 50 One size 7012199 7362541 7017978 7017989 1000 Dispensing Components www.nordsonefd.com/Piston-How-To
19 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Nordson EFD’s Optimum ECO dispensing components are manufactured from sustainably-sourced polyethylene and feature a bio-based content rating of 94% to 96%. This eco-friendly system helps meet corporate sustainability initiatives by using raw resins derived from sugarcane stock versus byproducts of the petrochemical industry. Features and Benefits • Eco-friendly components are made from renewable resources • Minimize consumption and greenhouse gases, reducing carbon footprint • Barrel transparency allows operator to see fluid level • Superior freezing properties for premixed fluids compared to standard polypropylene barrels ECO COMPONENTS Size ECO Natural Barrels ECO Natural Pistons ECO Natural End Caps Qty/Box 3cc 7366096 7366129 7366109 100 5cc 7366102 7366136 7366114 100 10cc 7366090 7366120 7366105 100 30cc 7366061 7366079 7366072 50 55cc 7366067 7366079 7366072 50 ECO TIP CAPS 7364679 — — — 50 Optimum ECO Components Optimum ECO pistons are designed for use with ECO barrels only. Unity HiTemp Components Nordson EFD’s disposable Unity™ HiTemp™ syringe barrels provide a cost-effective alternative to syringes commonly used in pneumatic dispensing of hot melt adhesives. The barrels are compatible with Nordson’s Unity IC Series and Unity PURJet™ 30 dispensing systems and other standard industry hot melt dispensers. Features and Benefits • Proprietary materials maintain integrity at high temperatures for up to eight hours • Disposability reduces downtime and maintenance costs with better cost of ownership compared to standard metal syringes • Reliable, repeatable hot melt adhesive dispensing at up to 180 °C UNITY COMPONENTS Size Syringe Barrels Tip Cap White Extreme HiTemp Adapter Assembly 6 ft Tubing Qty/ Box HiTemp (125 °C) Extreme HiTemp (180 °C) 30cc 7360475 7360473 7360452 7362347* 20 30cc 7360474 – – – 1000 30cc – 7360472 – – 500 *Adapter assemblies sold individually. Dispensing Components
20 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Dial-A-Dose Industrial Syringes Nordson EFD offers a comprehensive selection of syringes used for fluid packagers in the electronics rework, industrial, dental, and do-it-yourself markets. Dial-A-Dose® syringes are an ideal packaging system for controlled placement of adhesives and sealants. For multi deposit use, EFD Dial-A-Dose syringes offer an innovative, customizable solution to tailor deposits based on application size and other requirements. Features and Benefits • Range of sizes, colors, and nozzles • Self-venting barrels with “lead-in” aid for easy fill • Single and multi deposit syringes allow manufacturers to make the deposit, cap the syringe, and save for next deposit • Locking ring ensures exact amount is dispensed DIAL-A-DOSE INDUSTRIAL SYRINGES Syringes include integrated molded nozzle. Order plungers and caps separately. White caps molded in LDPE. Multi-Dose Plunger Single-Dose Plunger Options Syringe Size Material Color Cap Dial-A-Dose One-Piece Two-Piece Nozzle Style: Thin Taper 1/16" ID x 1-1/18" Length 7660277 6cc PE White 7660194 – 7660292 – 7022846 15cc PE White 7660194 7660343 7660329 7660333 Nozzle Style: Luer Lock 1/16" ID x 1/4" Length 7660392 32cc PP Amber 7660246 7660452 – 7660436 Continued next page For use with: Adhesives Epoxies & Silver Epoxies Greases & Lubricants Sealants Solder Pastes Dial-A-Dose plunger One-piece plunger Two-piece plunger Dial-A-Dose Industrial Syringes
21 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Dial-A-Dose Industrial Syringes DIAL-A-DOSE INDUSTRIAL SYRINGES Multi-Dose Plunger Single-Dose Plunger Options Syringe Size Material Color Cap Dial-A-Dose One-Piece Two-Piece Nozzle Style: Standard 3/16" ID x 1-13/32" Length 7660313 15cc PE White 7660198 7660343 7660329 7660333 7660399 32cc PE White 7660198 7660452 – 7660436 7660571 100cc PP Clear 7660198 7660580 – 7660581 Nozzle Style: Medium 9/32" ID x 1-13/32" Length 7660419 32cc PE White 7660207 7660452 – 7660436 7660482 34cc PE White 7660207 7660452 – 7660436 Nozzle Style: Cone 3/32" ID x 1-1/2" Length 7660371 30cc PE White 7660201 – 7660380 – Nozzle Style: Wide 13/32" ID x 1-5/16" Length 7660522 60cc PE White 7660191 7660538 – 7660528 7660553 80cc PE White 7660191 7660557 – 7660938 7660572 100cc PE White 7660191 7660580 – 7660581 From previous page
22 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Optimum Cartridge Systems Push-in air line connector End cap Locking tabs Detent for locking tab in cap Ergonomic grips for cap installation Clear retainer for easy visual monitoring Retainer Cartridge Self-venting outlet cap 0º taper cartridge Piston channels help dissipate air during filling Optimum cartridges and retainers have been designed to function as a complete, integrated system that improves yields and reduces costs in fluid packaging and dispensing processes. Cartridge systems are designed for applications that require a reservoir larger than a 70cc syringe barrel. They are available in 2.5 fl oz, 6 fl oz, 12 fl oz, 20 fl oz, and 32 fl oz capacities, and can be used to make timed or visual deposits. Features and Benefits • Exceptional clarity to allow visual confirmation of fluid levels • High-impact strength and dimensional stability • ZeroDraft™ design ensures that internal diameter is consistent from top to bottom • Excellent chemical compatibility with a wide range of fluids • Available in clear, black, amber, and white • White cartridges are molded from a proprietary blend and have better frozen temperature resistance
23 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Note: This data is typical and does not constitute a specification. Cartridge Dimensions Size A B 2.5 fl oz (75 mL) 43.2 mm (1.70") 98.8 mm (3.89") 6 fl oz (180 mL) 43.2 mm (1.70") 181.5 mm (7.15") 12 fl oz (360 mL) 43.2 mm (1.70") 314.3 mm (12.38") 20 fl oz (600 mL) 68.3 mm (2.69") 249.7 mm (9.83") 32 fl oz (960 mL) 68.3 mm (2.69") 346.4 mm (13.69") CARTRIDGES Size Clear White Amber Black QTY 2.5 fl oz (75 mL) 7659163 – 7659166 – 25 2.5 fl oz (75 mL) 7659164 – 7659167 – 250 6 fl oz (180 mL) 7012398 7361311 7012399 7012400 25 6 fl oz (180 mL) 7012401 7026679 7012402 7012403 250 12 fl oz (360 mL) 7012407 7029498 7012408 7012409 25 12 fl oz (360 mL) 7012410 7028389 7012411 7012412 250 20 fl oz (600 mL) 7012416 7028361 7012736 7013878 10 20 fl oz (600 mL) 7012417 7028362 7012737 7013879 100 32 fl oz (960 mL) 7014088 7028392 7014089 7014091 10 32 fl oz (960 mL) 7014092 7028393 7014093 7014095 100 Sets are available in clear for most fluids; transparent amber for UV- and light-sensitive materials (less than 12% visible light from 550 nm or less); and opaque black for complete light blockage. CARTRIDGE FITTINGS For both internal molded nozzle cartridges and external threaded cartridges. For cartridge nozzles, see Precision Dispensing Tips. Fitting Part # Material Description 7022420 Nylon Barrel loader fitting 90° 1/4 NPT male Female luer lock to barrel elbow 7022415 Stainless steel Barrel loader fitting 1/4 NPT male Female luer lock 7017020 Black polypropylene 1/4 NPT x 3/8 compression 7017014 Black polypropylene 1/4 NPT x 1/4 compression TIP ADAPTERS Adapter Part # Material Description 7016941 Polypropylene 1/4 NPT standard cartridge tip adapter 7016945 Nickel-plated brass 1/4 NPT special purpose tip adapter for 725D Series, 725DA Series, 725HF-SS, 736HPA-NV, and cartridges 7016948 Black polypropylene 1/4 NPT tip adapter Cartridge Systems Optimum Cartridge Systems
24 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 RETAINER SYSTEMS Retainer Systems* Retainer Bodies Part # Size Part # Size 7012430 2.5 fl oz (75 mL) 7013857 2.5 fl oz (75 mL) 7012433 6 fl oz (180 mL) 7013858 6 fl oz (180 mL) 7012436 12 fl oz (360 mL) 7013859 12 fl oz (360 mL) 7012439 20 fl oz (600 mL) 7013860 20 fl oz (600 mL) 7013899 32 fl oz (960 mL) 7013900 32 fl oz (960 mL) Retainer Cap Assemblies Part # Size 7012531 2.5, 6, 12 fl oz (75, 180, 360 mL) 7012532 20, 32 fl oz (600, 960 mL) Retainer Cap O-Ring Kits (2/pkg.) Part # Material Size 7014373 Buna 2.5, 6, 12 fl oz (75, 180, 360 mL) 7026914 EPR 2.5, 6, 12 fl oz (75, 180, 360 mL) 7026916 EPR 20, 32 fl oz (600, 960 mL) Optimum cartridge retainers are molded from high-tensile, clarified resin that permits easy visual monitoring of fluid levels. Large textured ribs provide an ergonomic grip for cap installation. Retainer caps feature locking tabs that snap securely into detents on the retainer body with an audible click. A push-in air line connector on top of the cap eliminates the need for bayonet connectors. *The retainer cap O-rings are available in three different materials. Please select the one most compatible with your fluid. Standard O-ring material is Buna. Cartridge Retainer Systems “EFD is our favorite vendor to deal with – fast, professional, and top notch products.” – Contract Packager Optimum Cartridge Systems
25 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Cartridge Retainer Systems with Regulators Nordson EFD precision, constant-bleed pressure regulators ensure consistent liquid pressurizing for consistent fluid dispensing results. Cartridge retainers systems with 7.0 bar (100 psi) pressure regulators include a cartridge retainer, retainer cap, 1.5 m (5 ft) of 6 mm (0.24") OD polyethylene feed tubing, and all necessary fittings. Should your application require a 1.0 bar (15 psi) pressure regulator, please purchase your cartridge retainer system and pressure regulator separately. All retainer systems include the cartridge retainer, cap, tubing, and fittings. RETAINER SYSTEMS WITH 7.0 BAR (100 PSI) REGULATORS Part # Size Description 7012432 2.5 fl oz (75 mL) Retainer system with 7.0 bar (100 psi) regulator 7012435 6 fl oz (180 mL) Retainer system with 7.0 bar (100 psi) regulator 7012438 12 fl oz (360 mL) Retainer system with 7.0 bar (100 psi) regulator 7012440 20 fl oz (600 mL) Retainer system with 7.0 bar (100 psi) regulator 7014100 32 fl oz (960 mL) Retainer system with 7.0 bar (100 psi) regulator RETAINER SYSTEMS AND 1.0 BAR (15 PSI) REGULATORS Part # Size Description 7012430 2.5 fl oz (75 mL) Retainer system 7012433 6 fl oz (180 mL) Retainer system 7012436 12 fl oz (360 mL) Retainer system 7012439 20 fl oz (600 mL) Retainer system 7013899 32 fl oz (960 mL) Retainer system 7020585 – 1.0 bar (15 psi) regulator (sold separately) 1/10 GALLON CARTRIDGE ASSEMBLY WITH REGULATOR Part # Size Description 7018646 1/10 gal (300 mL) Cartridge assembly for caulking tubes with 7.0 bar (100 psi) regulator Optimum Cartridge Systems
RkJQdWJsaXNoZXIy MzM3Mjk3MQ==